Ghibli AS 600 IK CBN User Manual Page: 17

EN
EN - 7
Removing and replacing the paper
dust collection bag (if present)
- Release the levers (5 Fig. 2) and remove
the cover (6 Fig. 3) complete with motor.
- Remove the polyester filter (8 Fig. 4).
- Remove the paper bag for collecting dust
(7 Fig. 4), and replace it as described
above.
- Reassemble all the parts by following the
dismantling process steps in the reverse
order.
Emptying the recovery tank
- Release the lever (5 Fig. 2) and remove
the top (6 Fig. 3) along with the engine.
- Place it on the top of a drain and empty
the liquid in the recovery tank (38 Fig.
18).
- Clean the inside of the tank with running
water and then re-install everything doing
the opposite of the disassembly.
For machines equipped with drain hose
- Release the exhaust tube (36 Fig. 18)
from its base.
- Unscrew the button (35 Fig. 18), re-
move the cap (34 Fig. 18) of the ex-
haust hose (37 Fig. 18) and drain the
liquid in the recovery tank (37 Fig.
18).
For devices with rocking tank
- Release the lever (5 Fig. 2) and re-
move the top (6 Fig. 3) along with the
engine.
- Remove the tank locking device by
acting the lever (40 Fig. 19) if any.
- Lift the tank (39 Fig. 17) with the ap-
propriate lever (41 Fig. 20) until com-
pletely emptied.
- Replace everything doing the oppo-
site of the disassembly.
Daily cleaning
Checking and cleaning the polyester
filter (if present)
- Release the levers (5 Fig. 2) and remove
the cover (6 Fig. 3) complete with motor.
- Remove the polyester (8 Fig. 4) filter.
- Clean the filter (Fig. 21) from the inside
out with a blast of air; the filter can be
washed (Fig. 21) in warm water and must
only be replaced once it is completely
dry. If it is too dirty, replace it.
- Reassemble all the parts by following the
dismantling process steps in the reverse
order.
Cleaning the appliance
- Clean the unit body with a cloth damp-
ened with water or a mild detergent.
- Remove the top, as described above and
clean the inside with running water and
then empty it, as indicated above.
Replace everything doing the opposite of
the disassembly.
DANGER:
Do not wash the appliance using jets of
water.
Periodic checks
Checking the floater
- Remove the top as shown above
- Check If the floater (43 Fig. 22) is In
good condition and if it moves freely in its
space.
Manuale SERIE AS calssic line-2012_CS6.indd 7 14/12/12 15.12