Marshall Electronics CV350-5XB OSD Menu Tree Page: 1

SETUP SUB MENU SUB MENU
DESCRIPTION
AWB
Controls the automac adjustment of the light source's color temperature to 3,000°K ~ 8,000°K.
ATW
Connuously adjusts camera color balance in accordance with any change in color temperature. Compensates for color temperature changes within the range of 1900K to 11000K.
PUSH
Color temperature will be manually adjusted by pushing the OSD buon. Place the white paper in front of the camera when OSD buon is pressed to obtain the opmum result.
INDOOR
Select this when the color temperature is between 4500K and 8500K.
OUTDOOR
Select this when the color temperature is between 1700K and 11000K (Ex. Sodium light inclusion)
MANUAL BLUE, RED
BLUE: Adjust the blue tone of the image (0~31). RED: Adjust the red tone of the image (0~31).
INDOOR, OUTDOOR
Select one according to the locaon of camera installaon. Then, select one sub-mode from AUTO, MANUAL, SHUTTER, PRIORITY, IRIS PRIORITY, and BRIGHT.
AUTO
IRIS and SHUTTER are controlled automacally.
MANUAL
IRIS, GAIN, and SHUTTERf are controlled manually.
SHUTTER PRIORITY
Manual SHUTTER and GAIN control with automac IRIS control.
IRIS PRIORITY
Manual IRIS and GAIN control with automac SHUTTER control.
BRIGHT
IRIS and GAIN can be controlled by control of BRIGHTNESS.
BRIGHTNESS MANUAL, 0~20
0~20: Adjust the screen brightness. MANUAL: BRIGHTNESS control is xed, and give the exposure control priority to other resources.
IRIS AUTO, MANUAL, 0~20
0~20: Adjust the IRIS screen brightness. AUTO: IRIS controls exposure automacally but SHUTTER is xed. MANUAL: IRIS control is xed, and give the exposure control priority to other resources.
AGC LIMIT 0~20
A funcon which controls the amplicaon/gain process automacally if the illuminaon falls under the usable level.
SHUTTER AUTO, MANUAL, 1/2~40K
1/2~40K: Adjust the SHUTTER speed. (1/2, 4, 8, 15, 30, 60, 90, 120, 150, 180, 250, 350, 500, 725, 1000, 1500, 2K, 3K, 4K, 6K, 10K, 20K, 30K, 40K)
DSS(SENS-UP) MANUAL, OFF~1/2
OFF~1/2: Adjust the level of DSS. (OFF, 1/30, 1/15, 1/8, 1/4, 1/2) When it is in low luminance condion, DSS can adjust the picture quality by maintaining the light level.
FLICKERLESS OFF, ON
Use this funcon when you experience picture icker, this happens when there is a clash with the installed lighng frequency.
AUTO
Automacally adjusts the focus posion.
MANUAL
Manually adjusts the focus posion when zoom is changed.
PUSH
When this mode is enabled, it will automacally adjusts the focus posion only when the zoom is changed.
ZOOM SPEED 0~7
Set the zoom speed.
TELE LIMIT X3~X60
Set the limit of the tele.
WIDE LIMIT X1~X2
Set the limit of the wide.
FAR END INFINITY, 2, 3, 5, 10M
Set the distance limit for the far focusing. The lens moves to adjust the focus from the distance.
NEAR END 30CM, 1, 1.5, 2, 3, 5, 10M
Set the priority distance limit for near focusing.
LENS INITIAL OFF, AUTO, ONE PUSH
AUTO: The focus is automacally adjusted at the pre-set interval (01~07). ONE PUSH: The focus is re-adjusted when the OSD buon is pushed over ONE PUSH.
USER P
RESET
This funcon is to set user dened zoom and focus posion. Up to 32 preset posion can be set with sub menu, USER PRESET, ACTIVE, SAVE, RESET.
WDR
Enable user to view both object and background more clearly when background is too bright. Set the WDR-LEVEL (0~4).
BLC
Enable a back light compensaon feature.
SPOT
Enables a user to select a desired area on a picture and view that area more clearly when background is too bright.
ACE GAIN
Brightness correcon of the dark image area. Adjust the GAIN level (LOW, MIDDLE, HIGH).
LEVEL
Highlight the bright area with a masking box with a selected color. Adjust the masking level (0~20).
COLOR
Select the color for masking (GRN, MAG, RED, BLUE, BLK, WHT, YEL, CYN)
D/N LEVEL
This level is threshold for switching day to night. It is same as the exposure gain level.
MARGIN
Set the margin between Day Night switching level and Night Day switching level. Dierent exposure gain level is needed to avoid malfuncons.
DWELL TIME
Select the checking me of light condion to conrm to chage from the day mode to the night mode.
NIGHT BURST
Night burst OFF makes that the color burst is removed when ICR switches
to black/white.
DAY
The picture is always displayed in color.
NIGHT NIGHT BURST
The picture is always displayed in black/white.
D/N LEVEL
The camera will stay in DAY in a normal environment, but switched to NIGHT mode when ambient illuminaon become this pre-set level.
DWELL TIME
Select the interval me from the day mode to the night mode.
NIGHT BURST
Alters the color burst informaon passed to the video monitor.
COLOR LEVEL 0~20
Adjust
the color level value for a ne color tune.
SHARPNESS 0~20
As you increase this value, the picture outline becomes stronger and clearer.
IMAGE FLIP
Video output will be ipped (MIRROR-HORIZONTALLY, FLIP-VERTICALLY, ROTATION).
DEFOG AUTO, MANUAL
This feature will help increase visibility in extreme weather condions, such as fog, rain or in a very strong luminous intensity.
3D-DNR OFF, LOW, MIDDLE, HIGH
This feature will reduce the video noise at
low ambient light.
MOTION
This feature will observe the object movement by moon zone and sensivity that are pre-set with sub menu, DET. SIZE, SENSITIVITY, MASK ACTIVE, WIDTH, HEIGHT, MOVE HOR, MOVE VER.
SHADING
This feature will correct the inconsistent brightness level in the image.
GAMMA
This feature will adjust video output brightness (STANDARD, STRAIGHT, LOW, MIDDLE, HIGH).
RESOLUTION
Change video output specicaon. CV350-AF5X: 1080P25/30, 1080i50/60, 720P50/60, 1080P
50/60. CV350-AF5XB: 1080P29.97, 1080i59.94, 1080P59.94, 720P59.94
USER TITLE
The camera tle can be entered and it will appear over the video output.
ZOOM MAGNIFICATION
Turn On or o of the zoom scale display.
PRIVACY
Mask an area you want to hide on the screen with sub menu, MASK NO, MASK ACTIVE, MASK COLOR, WIDTH, HEIGHT, MOVE HOR, MOVE VER, TRANS, RESET MASK, RESET ALL.
ADDRESS 0~255
Select the camera ID number.
ADDRESS DISPLAY OFF, ON
Select the display of camera ID.
BAUDRATE
Set the baudrate of RS-485 communicaon (2400, 4800, 9600, 19200, 38400, 57600, 115200).
LANGUAGE
You can select the menu language according to your requirements.
DEFECT ADJ
Derecve pixels can be corrected.
VER.
Display the rmware version.
RESET
Reset the camera sengs to the factory defaults.
EXIT
Exit the setup with SAVE setup change value or without NOT SAVE.
W
B
CONTROL
EXT
IMAGE
CONTROL
DISPLAY
CONTROL
AE
CONTROL
(EXPOSURE)
FOCUS MODE
FOCUS
CONTROL
WDR/BLC
ECLIPSE
BACK LIGHT
AUTO
Marshall Electronics
CV350-5XB / CV350-5X OSD menu tree