Marshall Electronics CV502-MB/M Quick Reference Manual Page: 1

Full-HD (3G/HD-SDI) 2.5MP Mini-Broadcast
POV Camera with 3.7mm 2MP Lens
LCDracks.com
CV502-MB/M Quick Start Guide
Marshall Electronics
WARNING
!
Do not use the camera if fumes, smoke or a strange odor is emitted
from the unit, or if it seems to not function correctly. Disconnect the
power source immediately and consult your supplier.
CA UTION
Always follow the instructions in the installation guide when
applying power. Fire and equipment damage can occur if power
is applied incorrectly. For the correct power supply, refer to the
CA UTION
Do not install or operate in small, unventilated areas. Heat build up
CA UTION
To prevent damage, do not drop the camera or subject it to strong
CA UTION
If installed close to a TV, radio transmitter, magnet, electric motor
interfere with or distort
the image.
CA UTION
Whether or not the camera is used outdoors, never point it toward
the sun. Use caution when operating the camera in the vicinity of spot
CA UTION
Do not use the camera in extreme environments where high
temperatures or high humidity exists. Use the camera under
conditions where temperatures are between 14°F ~ 122°F (-10°C ~
50°C), and humidity is below 90%.
shock or vibration.
37mm
37mm
60.0mm
CVBS
3G/HD-SDI
1. Please check whether lens mount type is a M12 mount.
2. Spring washer is to be inserted between a lens and a mount.
3. Go to the camera setup and set the LENS mode as ESC.
Fixed Focal Lens
M12 mount
12VDC
RS-485
+ -
+ -
1
2
3
4
5
6
1OSD Control
2CVBS Out
3SDI Out
4POWER LED
512VDC
6RS-485
Spring Washer
SPECIFICATIONS
Image Sensor 1/3” Progressive CMOS (Approx. 2.1 mega)
Scanning System 16:9 Progressive
Sync. System Internal
Effective Pixel 1920(H) x 1080(V)
Min. Illumination 0.2Lux (Day), 0.1Lux (Night), 0.005Lux (DSS on)
Horizontal Resolution 1,000TVL
Optics Lens Fixed HD lens
WDR/BLC
HLC (High Light compensation)
Exposure Auto / Manual
Auto (3,000°K~8,000°K)
ATW (1,900°K~11,000°K)
Manual
Day & Night System AGC / TDN
(ICR)
NTSC: 1/30~1/30000
PAL: 1/25~1/30000
DSS ( ~X64)
Privacy Mask, Image Mirror, 3DNR, Flickerless
Sharpness, Defog, DIS (Digital Image Stabilizer)
Motion Detection, DSS (Digital Shutter Speed)
SMPTE 292M (1.485Gbps)
1080p@25/30 or 29.97
1080i@50/60 or 59.94
720p@50/60 or 59.94
720p@25/30
SMPTE 424M (2.97Gbps)
1080p@50/60 or 59.94
800mVp-p, 75Ω, unbalanced generator(single-ended)
CVBS
(BNC) Analog Composite (1V ± 0.2 Vp-p) NTSC/PAL
PELCO-P/D, SONY-VISCA Protocol
8Bits Data, 1Stop Bit, No Parity, 2400~115200bps
Operation Temperature -10 ~ 50
Power Input 12VDC (7VDC to 15VDC)
Power consumption Max 6W
Dimensions (W X H X D)
Net Weight
SDI (BNC)
RS-485
General
Video
Output
Control
CV502
Sensor
Functions
Back Light Compensation
White Balance
Electronic Shutter
Functions
37(W) x 37(H) x 35(D)mm
Approx. 140g (With Lens)
Rear Panel Video/Power Connection Specifications
Dimensions
Features
· 2.5 Megapixel 1/3-inch CMOS Sensor
· 3.7mm Megapixel M12 Prime Lens installed (interchangeable)
· CV502-MB: 920x1080p59.94/29.97, 1920x1080i59.94,
1280x720p59.94/29.97fps
· CV502-M: 1920x1080p60/50/30/25, 1920x1080i60/50,
1280x720p60/50/30/25fps
· 3G/HD-SDI (BNC) & CVBS (BNC) built into rear panel)
· New WDR function supports high speed & high sensitivity
to various light sources
· OSD Menu Joystick, RS-485 connectable (Pelco/Visca)
· 12VDC
How to Change a Fixed Focal Lens