Waldorf Bold RNLB8619EC Specification Sheet Page: 1

Waldorf Bold RNLB8619EC Specification Sheet Page: 1
Overall Construction
Galvanized steel chassis
Welded hob with 1.5mm 304 stainless steel bull nose
Splashback and hob sides 1.2mm 304 stainless steel
Front panels and oven sides 0.9mm 304 stainless steel
150mm legs in 63mm dia. heavy-duty 1.2mm 304 stainless steel
with adjustable feet
Cooktop
2.4kW open radiant elements in heavy-duty welded element frames
Vitreous enamelled element module and hob spill trays
Hot Plate elements with machine finished 8mm steel plate
(optional extra)
12mm thick mild steel griddle plates
2.5mm 304 stainless steel griddle splash guards
Aluminised steel internal construction
Griddle sections are standard on RH side. Available on LH side or centre
to order or by conversion.
Oven
Fully welded and vitreous enamelled oven liner
GN 2/1 capacity with 4 position racking
Heavy-duty easy remove heavy wire chrome rack supports
Cast iron even heat oven sole plate
6.5kW heating elements
100W heavy-duty motor
200mm diameter heavy-duty circulation fan
Welded frame drop down door with heavy-duty spring hinge system
0.9mm 304 stainless steel door outer
1.0mm press formed vitreous enamelled door inner
High density fibreglass insulated
Stay cool stainless steel door handle with cast metal handle mounts
Supplied with two chrome wire oven racks
Controls
Large easy use control knob - heat resistant reinforced
Easy view control settings on knob
Cooktop
Radiant elements with energy regulator controls
Hot Plate elements with energy regulator controls
•50-32Cthermostatper300mmgriddlesection
Indicator lights for power and heating for each element control
Oven
•50-32Cthermostaticcontrol
Indicator lights for power and heating
Cleaning and Servicing
All models with easy clean stainless steel external finish
Removable vitreous enamelled element module and hob spill trays
Hinge up element and griddle sections
Removable oven racking and sole plate
Easy clean vitreous enamel oven and door inner
Door hinge spring adjustable on unit (door outer removed)
Door disengages for lift off removal and increased service access
All parts front accessible from installed position
Access to all parts from front of unit
Technical data sheet for
ELECTRIC RANGE CONVECTION OVEN 900mm
RN8610EC, RN8613EC, RN8616EC, RN8619EC
Heavy-duty construction
2.4kW open radiant elements
Optional Hot Plate elements
300mm, 600mm and 600mm griddle plate
options
Optional Hot Plate elements
GN 2/1 6.6kW electric convection oven
Drop down door
Stainless steel exterior
Easy clean
Easy service
Fully modular
Low back models (RNL) available
RN8610EC