Hunter Industries WFS-ALKBATT Owners Manual Page: 11

11
CONNECTING THE WFS TO THE IRRIGATION SYSTEM
WARNING! WFS is only designed for low-voltage connection to approved irrigation controller flow terminals. Do not install in high-
voltage 120 V or 230 V circuits.
The transmitter may be placed up to 500 /150 m from the controller.
Connecting the receiver to the I-Core controller
Add Space after numbers, and correct spelling
of Controller
NOTE: Remove nut from WFS receiver and insert
threaded portion and wires through the knock out in the
controller. Hand tighten nut until receiver is held firmly
in place.