Connecting the Probe to the NODE-BT
Cut the clear, waterproof seal on the two gray wires
connected to the controller. Connect the gray/black
probe wires to the two gray NODE-BT wires with
waterproof connections. Note that polarity is not
important in this system.
The probe can be placed up to 100' (30 m)
away from the NODE-BT controller using
18 AWG (1 mm
) direct-burial wire secured
with waterproof connectors. The probe can
be extended further using thicker gauge wire;
however, communication must be tested.
The Soil-Clik® module is not used with NODE-BT