SC-PROBE FOR SOIL-CLIK
MODULE AND NODE-BT
Do not the install probe horizontally.
➊ Soak lower two-thirds of probe for 30 minutes before installing.
Do not allow water to cover the top cap where wires are connected.
③ Mix a slurry of native soil and water. Pour the mixture into the hole.
② Use ½" (12 mm) PVC pipe to make a vertical hole to desired depth
in the soil (outside diameter ⁄" (22 mm)).
④ Place sensor in vertical position (do not tilt more than 45°) at
bottom of hole.
Installing the SC-PROBE
Visit hunter.direct/soilclik for complete setup information.